Spirometry measures how well the lungs exhale. The information gathered during this test is useful in diagnosing certain types of lung disorders, but is most useful when assessing for obstructive lung diseases (especially asthma and chronic obstructive pulmonary disease, COPD). 

Lung volume measurement permits the detection of restrictive lung diseases.  In this set of diseases, a person cannot inhale a normal volume of air.  Restrictive lung diseases may be caused by inflammation or scarring of the lung tissue (interstitial lung disease) or by abnormalities of the muscles or skeleton of the chest wall.

Testing the diffusion capacity (also called the DLCO) permits an estimate of how efficiently the lungs are able to transfer oxygen from the air into the bloodstream.

How the Test is Performed

• Spirometry: a person performs the test by breathing into mouthpiece that is connected to an instrument called a spirometer. The spirometer records the amount of air and the rate of air that is breathed in and out over a specified time. Some of the test measurements are obtained by normal, quiet breathing, and other tests require forced inhalation or exhalation after a deep breath.
• Lung volume meaurement can be performed in two ways.  The most accurate way is for a person to sit in a plesmythograph, a sealed, transparent box which resembles a telephone booth, while breathing in and out against into a mouthpiece.  Changes in pressure inside the box allow determination of the lung volume.  Lung volume can also be measured when a person breathes nitrogen or helium gas through a tube for a specified period of time.  The concentration of the gas in a chamber attached to the tube is measured, allowing estimation of the lung volume.
• The diffusion capacity is measured when a person breathes carbon monoxide for a very short time (often one breath). The concentration of carbon monoxide in exhaled air is then measured.  The difference in the amount of carbon monoxide inhaled and the amount exhaled allows estimation of how rapidly gas can travel from the lungs into the blood.

How to Prepare for the Test

Do not eat a heavy meal before the test. Do not smoke for 4 to 6 hours prior to the test. Specific instructions will be given if bronchodilators or inhaler medications should be withheld. Sometimes, medication may be inhaled prior to the test.

Children:
The physical and psychological preparation you can provide for this or any test or procedure depends on your child's age, interests, previous experiences, and level of trust. For specific information regarding how you can prepare your child, see the following topics as they correspond to your child's age:

• Toddler test or procedure preparation (1 to 3 years)
• Preschooler test or procedure preparation (3 to 6 years)
• Schoolage test or procedure preparation (6 to 12 years)
• Adolescent test or procedure preparation (12 to 18 years)

How the Test will Feel

Since the test involves some forced breathing and rapid breathing, some temporary shortness of breath or lightheadedness may be experienced. There is a tight fitting mouth piece to breathe through, and nose clips are applied.

Why the Test is Performed

The test is performed to diagnose certain types of lung disease (especially asthma, bronchitis, and emphysema), to determine the cause of shortness of breath, or to measure whether occupational exposure to contaminants affects lung function.  It can also be used after the administration of medications to assess their effect, and to measure progress in disease treatment.

Ency. home > Test > < >

Pulmonary function tests

---

[an error occurred while processing this directive]